Spa Volume Square
Calculator

Inputs

Water volume (m³)
3.6

Results

Water volume (m³)
3.6
Water volume (L)
3,600
Water surface area (m²)
4

Pool and aquarium results

Water volume (m³)3.6
Water volume (L)3,600
Water surface area (m²)4

formula-map diagram

Water volume (m³)
3.6
Water volume (L)
3,600
Water surface area (m²)
4

Pool and aquarium relationship

Formula

V = side² × depth

= 3.6

Note

This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.

Example: with the default inputs, calculator.pool.volume_m3 is 3.6.

More in Pool and aquarium

See all →

Frequently asked questions

How do I calculate the volume of a square spa?+

Multiply the side length by itself, then by the water depth: V = side² × depth. The result is given in cubic metres and litres.

Which depth should I enter?+

Enter the water depth, not the full height of the shell. The calculator uses exactly the value you give for the depth.

How are cubic metres converted to litres?+

The volume in m³ is multiplied by 1,000 to give litres, since 1 m³ equals 1,000 L.

Does the result include the water displaced by people or seats?+

No. It is a simple side × side × depth box, so seats, steps and bathers are not subtracted. Treat the result as an estimate.

What else does the calculator show?+

It also gives the surface area of the water (side × side) in m².