Saltwater Chlorinator Cell Runtime
Calculator
Results
- Chlorine needed per day (g)
- 50
- Salt cell runtime (hours/day)
- 2.5
- Salt cell runtime (% of day)
- 10.416666
Pool and aquarium results
| Chlorine needed per day (g) | 50 |
| Salt cell runtime (hours/day) | 2.5 |
| Salt cell runtime (% of day) | 10.416666 |
formula-map diagram
- Chlorine needed per day (g)
- 50
- Salt cell runtime (hours/day)
- 2.5
- Salt cell runtime (% of day)
- 10.416666
Pool and aquarium relationship
Formula
runtime = (target ppm/day × volume(m³)) ÷ cell output rate= 50
Note
This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.
Example: with the default inputs, calculator.pool.chlorine_needed_g_per_day is 50.
More in Pool and aquarium
See all →Frequently asked questions
How is the salt cell runtime calculated?+
The calculator multiplies the chlorine you want to produce per day (ppm) by the pool volume in m³ to get grams, then divides by the cell's rated output in g/h: runtime = (target ppm/day × volume) ÷ cell output.
What does 1 ppm per m³ mean here?+
The calculator treats 1 ppm in 1 m³ of water as 1 g of chlorine. So the daily chlorine needed in grams equals target ppm × volume in m³.
Where do I find the cell output?+
Enter the rated output in grams of chlorine per hour from your cell's specifications. The default of 20 g/h is only an example.
Does the calculation include chlorine loss from sunlight or bathers?+
No. It only works out the production needed for the ppm you enter. Increase the target if you expect higher demand.
What results does it give?+
It shows the chlorine needed per day in grams, the cell runtime in hours per day, and that runtime as a percentage of 24 hours. It is an estimate, not water-treatment advice.