Pool Backwash Water Loss
Calculator
Results
- Water lost (L)
- 450
- Water lost (m³)
- 0.45
Pool and aquarium results
| Water lost (L) | 450 |
| Water lost (m³) | 0.45 |
formula-map diagram
- Water lost (L)
- 450
- Water lost (m³)
- 0.45
Pool and aquarium relationship
Formula
loss = backwash flow rate × backwash duration= 450
Note
This is a simplified model: it applies a standard geometric or physical formula to the numbers you entered. Volumes assume a regular shape and an even average depth, and the kidney shape uses the common 0.45 × (A + B) × L area approximation. Chemical doses convert a target change into a product mass using the strength or label dose you enter, because the amount of active ingredient varies from product to product; they ignore pH, temperature, buffering, sunlight, bather load and existing chemical interactions. Heating uses Q = m × c × ΔT with c = 4186 J/kg·K and ignores heat losses to air, ground and evaporation; evaporation and cover figures use the rate you enter, not local weather. Aquarium stocking by surface area is a rule of thumb, not a biological limit. Always follow the product label and test the water before and after dosing, and consult a pool or aquarium professional for anything you are unsure about.
Example: with the default inputs, calculator.pool.water_lost_l is 450.
More in Pool and aquarium
See all →Frequently asked questions
How much water does a backwash use?+
The calculator multiplies the backwash flow rate (L/min) by the backwash duration (minutes). With the defaults of 150 L/min for 3 minutes, that is 450 L.
Where do I find my backwash flow rate?+
It is a value you enter. Use the flow your pump actually delivers through the filter during backwash, since the calculator does not estimate it for you.
Does it also give the result in cubic metres?+
Yes. Besides litres, it shows the same loss in m³ by dividing the litres by 1000.
Does this include the water needed to rinse the filter afterwards?+
No. The result is only flow rate × duration for the backwash cycle itself. Any extra rinse step would have to be added by hand.
How can I reduce backwash water loss?+
Since the loss is flow × time, a lower flow or a shorter cycle lowers the result directly. Try different values to compare, and follow your filter manufacturer's instructions for the right settings.