Wheatstone Bridge Balance
Calculator

Inputs

Unknown resistance Rx (Ω)
330

Results

Unknown resistance Rx (Ω)
330

Electrical results

Unknown resistance Rx (Ω)330

formula-map diagram

Unknown resistance Rx (Ω)
330

Electrical relationship

Formula

Rx = R2 × R3 / R1 (bridge balanced)

= 330

Note

This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.

Example: with the default inputs, calculator.electrical.unknown_resistance_ohm is 330.

More in Electrical engineering

See all →

Frequently asked questions

What does this Wheatstone bridge calculator compute?+

It returns the unknown resistance Rx of a balanced bridge using Rx = R2 × R3 / R1, in ohms.

What does "balanced" mean here?+

The formula assumes the bridge is balanced, meaning the galvanometer between the two arms reads zero. The calculator does not model an unbalanced bridge or its output voltage.

Which resistors do I enter?+

Enter the known resistance R1, the known resistance R2 and the variable or standard resistance R3, all in ohms. Rx is computed from those three values.

Why can R1 not be zero?+

R1 is the divisor in the formula, so zero would mean division by zero. The calculator keeps R1 at a tiny positive minimum.

Does the supply voltage matter?+

No. At balance the result depends only on the resistance ratios, so no source voltage is needed and none is asked for.