Stroke Width At Zoom
Calculator

Inputs

Displayed width (px)
4

Results

Displayed width (px)
4
Width needed for 1px visual (px)
0.5

Design and print results

Displayed width (px)4
Width needed for 1px visual (px)0.5

formula-map diagram

Displayed width (px)
4
Width needed for 1px visual (px)
0.5

Formula breakdown

Formula

displayed width = stroke width × (zoom ÷ 100)

= 4

Note

Simplified model: these are standard prepress and typographic relationships computed on nominal values. Real press bulk, paper caliper and shrinkage, ink limits for a given profile, font metrics and binding allowances vary by supplier and by job, so confirm with your printer and a proof before going to press.

Example: with the default inputs, calculator.design.displayed_width_px is 4.

More in Design and printing

See all →

Frequently asked questions

How is the displayed stroke width at a zoom level calculated?+

The calculator multiplies the stroke width at 100% by the zoom divided by 100. A 2 px stroke at 200% zoom is displayed at 4 px.

What does the 1 px visual width result mean?+

It is 1 divided by the zoom factor, in pixels: the stroke width at 100% that would appear as 1 px on screen at the chosen zoom. At 200% it is 0.5 px.

Does a stroke get thicker when I zoom in?+

In this calculation, yes: the displayed width scales linearly with zoom. Strokes set to a non-scaling mode in your software would not follow this formula.

What zoom values can I enter?+

Any value greater than zero, entered as a percentage. 100% means no scaling, so the displayed width equals the stroke width.

Which units does it use?+

Both stroke width and results are in pixels. The calculator does not convert to points or millimetres.