Pixels To Print Size
Calculator
Results
- Print width (inches)
- 10
- Print height (inches)
- 6.666666
- Print width (cm)
- 25.4
- Print height (cm)
- 16.933333
Design and print results
| Print width (inches) | 10 |
| Print height (inches) | 6.666666 |
| Print width (cm) | 25.4 |
| Print height (cm) | 16.933333 |
formula-map diagram
- Print width (inches)
- 10
- Print height (inches)
- 6.666666
- Print width (cm)
- 25.4
- Print height (cm)
- 16.933333
Formula breakdown
Formula
inches = pixels ÷ DPI= 10
Note
Simplified model: these are standard prepress and typographic relationships computed on nominal values. Real press bulk, paper caliper and shrinkage, ink limits for a given profile, font metrics and binding allowances vary by supplier and by job, so confirm with your printer and a proof before going to press.
More in Design and printing
See all →Frequently asked questions
How do I convert pixel dimensions to a physical print size?+
Divide the pixel width and height by the resolution you plan to print at (in pixels per inch, PPI). For example, a 3000x2000 pixel image printed at 300 PPI yields a 10x6.67 inch print. Lower PPI values give a larger physical print from the same pixel count, but with less sharpness.
What PPI should I use for the conversion?+
Use 300 PPI for close-viewing prints like photos, magazines, or business cards, and 150 PPI for posters or banners viewed from a distance. Screen-only images typically assume 72 or 96 PPI, which is why a screenshot looks huge when you naively convert it at 300 PPI.
Why does the same image produce different print sizes in different software?+
Because each program reads (or assumes) a different PPI metadata value embedded in the file. The pixel dimensions never change, but the print size is only meaningful once you pick a target PPI, so two tools with different defaults will report different sizes for the identical file.
Does resizing the print size change my actual pixel data?+
No. Changing the PPI value alone only changes how large the image prints; it does not add or remove any pixels. To actually gain sharpness at a larger print size you need to increase the pixel count through upscaling or a higher-resolution source capture.
My print came out blurry even though the calculator said it fit at 300 PPI — why?+
Check whether the file was upscaled or heavily compressed before printing, since interpolated pixels don't carry the same detail as native resolution. Also confirm the printer driver isn't rescaling the image again at a different PPI than you specified.