Star To Delta Conversion
Calculator
Results
- Delta resistance Ra (Ω)
- 43.333333
- Delta resistance Rb (Ω)
- 32.5
- Delta resistance Rc (Ω)
- 65
Electrical results
| Delta resistance Ra (Ω) | 43.333333 |
| Delta resistance Rb (Ω) | 32.5 |
| Delta resistance Rc (Ω) | 65 |
formula-map diagram
- Delta resistance Ra (Ω)
- 43.333333
- Delta resistance Rb (Ω)
- 32.5
- Delta resistance Rc (Ω)
- 65
Electrical relationship
Formula
Ra = (R1R2+R2R3+R3R1)/R2 ; Rb = .../R3 ; Rc = .../R1= 43.333333333333
Note
This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.
Example: with the default inputs, calculator.electrical.delta_ra_ohm is 43.333333333333336.
More in Electrical engineering
See all →Frequently asked questions
What does the star to delta conversion compute?+
Given the three star (Y) resistances R1, R2 and R3, it returns the equivalent delta (Δ) resistances Ra, Rb and Rc, in ohms.
What formula does it use?+
With S = R1R2 + R2R3 + R3R1, it computes Ra = S / R2, Rb = S / R3 and Rc = S / R1.
Which star resistor goes with which delta resistor?+
As coded here, Ra is divided by R2, Rb by R3 and Rc by R1. Check that your own labelling of the delta corners matches this convention before using the values.
Why are zero resistances not accepted?+
Each star resistance is used as a divisor, so zero would cause a division by zero. The calculator keeps each value at a tiny positive minimum.
Is the result valid for AC circuits?+
The formulas are written for resistances. For AC they only apply if you replace them with impedances, which this calculator does not handle.