Solar Array Series Parallel Sizing
Calculator

Inputs

Array voltage (V)
96

Results

Array voltage (V)
96
Array current (A)
24
Array power (W)
2,304

Electrical results

Array voltage (V)96
Array current (A)24
Array power (W)2,304

formula-map diagram

Array voltage (V)
96
Array current (A)
24
Array power (W)
2,304

Electrical relationship

Formula

V_array = V_panel × n_series ; I_array = I_panel × n_parallel

= 96

Note

This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.

Example: with the default inputs, calculator.electrical.array_voltage_v is 96.

More in Electrical engineering

See all →

Frequently asked questions

How do I size a solar array in series and parallel?+

Enter the panel voltage and current, the number of panels in series and the number of strings in parallel. The calculator gives V_array = V_panel × n_series and I_array = I_panel × n_parallel.

What happens to voltage and current when panels are wired in series?+

In this calculator, panels in series add their voltages: the array voltage is the panel voltage times the number of panels in series.

What happens when strings are connected in parallel?+

Parallel strings add their currents: the array current is the panel current times the number of strings in parallel.

How is the array power calculated?+

Array power is the array voltage times the array current, in watts. With the defaults, 24 V × 4 panels and 8 A × 3 strings.

Does the result account for temperature, shading or inverter limits?+

No. It only multiplies the values you enter. Temperature effects, shading, losses and inverter or charge-controller limits are not included, so treat the result as an estimate, not a design approval.