Nyquist Sampling Rate
Calculator

Inputs

Nyquist rate (Hz)
40,000

Results

Nyquist rate (Hz)
40,000
Nyquist rate (kHz)
40
Sample period (µs)
25

Computing results

Nyquist rate (Hz)40,000
Nyquist rate (kHz)40
Sample period (µs)25

formula-map diagram

Nyquist rate (Hz)
40,000
Nyquist rate (kHz)
40
Sample period (µs)
25

Computing relationship

Formula

f_s = 2 × f_max

= 40000

Note

This is a simplified model: it applies the standard computing formula to the numbers you entered and ignores protocol overhead, compression variability, retries, contention and other real-world effects. Size your systems with measured data.

Example: with the default inputs, calculator.technology.nyquist_rate_hz is 40000.

More in Technology and computing

See all →

Frequently asked questions

What is the Nyquist sampling rate?+

It is the minimum sampling rate this calculator returns for a signal: f_s = 2 × f_max, where f_max is the highest frequency in the signal in hertz. It is shown in Hz and kHz.

What do I enter as the highest frequency?+

Enter the highest frequency present in your signal, in Hz. The default is 20,000 Hz, which gives a rate of 40,000 Hz (40 kHz).

What is the sampling period shown in the result?+

It is the time between two samples at the computed rate, 1 ÷ f_s, expressed in microseconds. For the default 20,000 Hz input it is 25 µs.

Is sampling at exactly twice the frequency enough in practice?+

The calculator only computes the factor of two. It does not model anti-aliasing filters, signal reconstruction or any safety margin, so real designs often sample above this value.

What happens if I sample below this rate?+

This calculator does not simulate that case. It only returns 2 × f_max as the reference rate for the highest frequency you entered.