Impedance Magnitude Phase
Calculator
Results
- Impedance magnitude (Ω)
- 50
- Phase angle (degrees)
- 36.869897
Electrical results
| Impedance magnitude (Ω) | 50 |
| Phase angle (degrees) | 36.869897 |
formula-map diagram
- Impedance magnitude (Ω)
- 50
- Phase angle (degrees)
- 36.869897
Electrical relationship
Formula
Z = √(R² + X²) ; φ = atan2(X, R)= 50
Note
This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.
Example: with the default inputs, calculator.electrical.impedance_magnitude_ohm is 50.
More in Electrical engineering
See all →Frequently asked questions
How do I calculate impedance magnitude and phase angle?+
Enter the resistance R and the net reactance X in ohms. The calculator gives Z = √(R² + X²) and the phase angle φ = atan2(X, R) in degrees.
What does the phase angle tell me?+
A positive angle means the net reactance is inductive, a negative angle means it is capacitive, and 0° means a purely resistive impedance.
Can the reactance be negative?+
Yes. Enter the net reactance X as inductive reactance minus capacitive reactance, so a net capacitive circuit gets a negative value and a negative phase angle.
Does this calculator compute X from frequency, L or C?+
No. It takes R and the net reactance X directly in ohms. You must compute X separately if you start from an inductance or capacitance.
In which units are the results given?+
The impedance magnitude is in ohms and the phase angle is in degrees. Using atan2 keeps the angle correct even when R is zero or negative.