Halftone Screen Ruling Quality
Calculator

Inputs

Quality factor
2

Results

Quality factor
2
Maximum gray levels
5

Design and print results

Quality factor2
Maximum gray levels5

formula-map diagram

Quality factor
2
Maximum gray levels
5

Formula breakdown

Formula

quality factor = output DPI ÷ screen ruling (LPI); gray levels = (DPI ÷ LPI)² + 1

= 2

Note

Simplified model: these are standard prepress and typographic relationships computed on nominal values. Real press bulk, paper caliper and shrinkage, ink limits for a given profile, font metrics and binding allowances vary by supplier and by job, so confirm with your printer and a proof before going to press.

Example: with the default inputs, calculator.design.quality_factor is 2.

More in Design and printing

See all →

Frequently asked questions

What is the halftone quality factor?+

It is the output resolution in DPI divided by the screen ruling in LPI. With 300 DPI and 150 LPI the factor is 2.

How are the maximum gray levels computed?+

The calculator uses (DPI ÷ LPI)² + 1. With the defaults, (300 ÷ 150)² + 1 gives 5 gray levels.

What do the two inputs mean?+

Output DPI is the resolution of your imagesetter or printer, and screen ruling (LPI) is the number of halftone lines per inch. Both must be greater than zero.

Does a higher quality factor always mean a better print?+

The calculator only reports the ratio and the gray-level count it implies. A higher ratio gives more gray levels for the same ruling; it does not model paper, press or ink behaviour.

How can I get more gray levels?+

Either raise the output DPI or lower the screen ruling, since the formula depends only on their ratio. Lowering the ruling coarsens the screen, so the choice is a trade-off for your job.