Capacitor Charge
Calculator
Results
- Charge (C)
- 0.00752
- Charge (µC)
- 7,520
Electrical results
| Charge (C) | 0.00752 |
| Charge (µC) | 7,520 |
formula-map diagram
- Charge (C)
- 0.00752
- Charge (µC)
- 7,520
Electrical relationship
Formula
Q = C × V= 0.00752
Note
This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.
Example: with the default inputs, calculator.electrical.charge_coulombs is 0.00752.
More in Electrical engineering
See all →Frequently asked questions
How is the charge on a capacitor calculated?+
This calculator uses Q = C × V. Enter the capacitance in microfarads and the voltage in volts, and it returns the charge.
In what units is the charge given?+
It returns the charge both in coulombs and in microcoulombs, the second being the first multiplied by 1,000,000.
Do I enter the capacitance in farads?+
No, the capacitance field is in microfarads (µF). The calculator converts it to farads internally by dividing by 1,000,000.
What voltage should I use?+
Use the voltage across the capacitor's terminals. The calculator takes it as given and does not check it against any rated voltage of the component.
Does it tell me how long the capacitor takes to charge?+
No. It computes only the charge stored at a given voltage, Q = C × V, and does not model charging time or any resistor in the circuit.