Awg Wire Gauge Sizing
Calculator
Results
- Wire diameter (mm)
- 2.052525
- Wire cross-sectional area (mm²)
- 3.308772
- Wire resistance (Ω)
- 0.051983
Electrical results
| Wire diameter (mm) | 2.052525 |
| Wire cross-sectional area (mm²) | 3.308772 |
| Wire resistance (Ω) | 0.051983 |
formula-map diagram
- Wire diameter (mm)
- 2.052525
- Wire cross-sectional area (mm²)
- 3.308772
- Wire resistance (Ω)
- 0.051983
Electrical relationship
Formula
d(mm) = 0.127 × 92^((36−AWG)/39) ; R = ρ×L/A= 2.0525253884939
Note
This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.
Example: with the default inputs, calculator.electrical.wire_diameter_mm is 2.052525388493948.
More in Electrical engineering
See all →Frequently asked questions
What does this AWG calculator compute?+
From an AWG gauge number and a wire length, it returns the wire diameter in mm, the cross-section area in mm² and the resistance of that length of copper wire.
How is the wire diameter calculated?+
It uses d(mm) = 0.127 × 92^((36 − AWG)/39). The cross-section is then the area of a circle with that diameter.
What resistivity is used for the resistance?+
The calculator uses a fixed copper resistivity of 0.0172 Ω·mm²/m, then R = ρ × L / A. Other metals or temperatures are not handled.
Is the length the wire length or the round trip?+
It is the length you enter, used as-is. For a circuit with a go and return conductor, enter the total conductor length, meaning twice the distance.
Does it tell me which gauge is safe for my current?+
No. It gives diameter, area and resistance only, with no current rating or voltage-drop limit. Check wiring rules or a qualified electrician for safety decisions.