Amplifier Power Gain Db
Calculator
Results
- Power gain (dB)
- 20
- Power gain ratio
- 100
Electrical results
| Power gain (dB) | 20 |
| Power gain ratio | 100 |
formula-map diagram
- Power gain (dB)
- 20
- Power gain ratio
- 100
Electrical relationship
Formula
Ap(dB) = 10 × log10(Pout / Pin)= 20
Note
This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.
Example: with the default inputs, calculator.electrical.power_gain_db is 20.
More in Electrical engineering
See all →Frequently asked questions
How do I calculate amplifier power gain in decibels?+
Enter the input power and the output power in watts. The calculator applies Ap(dB) = 10 × log10(Pout / Pin).
Why is the power gain formula 10 × log10 and not 20 × log10?+
This calculator works with powers, so it uses 10 × log10 of the power ratio. The factor 20 is used when the quantities are voltages or currents, which this tool does not compute.
What does a negative gain in dB mean?+
A negative result means the output power is lower than the input power, so the stage attenuates the signal. A result of 0 dB means the two powers are equal.
What is the difference between the dB gain and the gain ratio?+
The ratio is simply Pout divided by Pin, while the dB value is 10 times the base-10 logarithm of that ratio. The calculator shows both.
Which units should I use for input and output power?+
Use watts for both fields, since the formula only needs their ratio. Both values must be greater than zero, because a logarithm of zero or a negative number is undefined.