Ac Rms From Peak Voltage
Calculator
Results
- RMS voltage (V)
- 229.809703
Electrical results
| RMS voltage (V) | 229.809703 |
formula-map diagram
- RMS voltage (V)
- 229.809703
Electrical relationship
Formula
Vrms = Vpeak / √2= 229.80970388563
Note
This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.
Example: with the default inputs, calculator.electrical.rms_voltage_v is 229.80970388562793.
More in Electrical engineering
See all →Frequently asked questions
How do I convert peak voltage to RMS?+
This calculator divides the peak voltage by √2 (about 1.414): Vrms = Vpeak / √2. For example, a 325 V peak gives roughly 230 V RMS.
What does RMS voltage mean?+
RMS is the effective value of an AC voltage, the DC level that would deliver the same heating power in a resistor. It is lower than the peak value.
Does this formula work for any waveform?+
The division by √2 is specific to a sinusoidal waveform. Square, triangle or PWM signals have a different peak-to-RMS ratio, so this result would not apply to them.
Should I enter peak or peak-to-peak voltage?+
Enter the peak voltage, measured from zero to the top of the wave. This calculator has no peak-to-peak input, so halve a peak-to-peak reading first.
Why is 325 V the default?+
325 V is a peak value that corresponds to about 230 V RMS with the formula Vrms = Vpeak / √2. Replace it with your own measured or specified peak voltage.