Ac Peak From Rms Voltage
Calculator

Inputs

Peak voltage (V)
325.269119

Results

Peak voltage (V)
325.269119

Electrical results

Peak voltage (V)325.269119

formula-map diagram

Peak voltage (V)
325.269119

Electrical relationship

Formula

Vpeak = Vrms × √2

= 325.26911934581

Note

This is a simplified model: it applies the textbook relationship to the numbers you entered and assumes ideal components, steady-state sinusoidal conditions, balanced loads and copper resistivity of 0.0172 Ω·mm²/m at 20 °C. It ignores component tolerances, temperature drift, skin effect, harmonics, inrush, transformer and battery losses, and it is not a substitute for the wiring code that applies where you are. Have any installation sized and verified by a licensed electrician or engineer.

Example: with the default inputs, calculator.electrical.peak_voltage_v is 325.2691193458119.

More in Electrical engineering

See all →

Frequently asked questions

How do I convert RMS voltage to peak voltage?+

This calculator multiplies the RMS voltage by √2 (about 1.414): Vpeak = Vrms × √2. For example, 230 V RMS gives roughly 325 V peak.

Why is the peak voltage higher than the RMS value?+

RMS is the effective value of the AC voltage, while the peak is the maximum instantaneous value. For a sine wave the peak is √2 times the RMS.

Does this work for non-sinusoidal waveforms?+

No. The √2 factor applies to a sinusoidal waveform only. Other shapes have a different peak-to-RMS ratio.

Is the result peak or peak-to-peak?+

The result is the peak voltage, measured from zero to the top of the wave. For peak-to-peak, double it yourself, since the calculator does not output that value.

Why is 230 V the default?+

230 V is simply the default RMS value in the field. Replace it with your own RMS voltage, such as a measured or rated value.