Wood Movement Seasonal Gap
Calculator
Results
- Required gap (mm)
- 80
- Gap per metre (mm)
- 20
- Required gap (inches)
- 3.149606
Results
| Required gap (mm) | 80 |
| Gap per metre (mm) | 20 |
| Required gap (inches) | 3.149606 |
formula-map diagram
- Required gap (mm)
- 80
- Gap per metre (mm)
- 20
- Required gap (inches)
- 3.149606
Formula map
Formula
Gap = run width × movement coefficient ÷ 100 × humidity swing= 80
Note
This result is a simplified model; verify against your shop's own tolerances and material data before cutting.
Example: with the default inputs, calculator.woodwork.required_gap_mm is 80.
More in Woodworking and metalwork
See all →Frequently asked questions
How is the seasonal expansion gap calculated?+
The calculator multiplies the total run width by the movement coefficient (as a percentage divided by 100) and by the seasonal humidity swing: gap = width × coefficient ÷ 100 × swing. The result is the required gap in millimetres and inches.
What is the tangential movement coefficient?+
It is a number you enter, in percent, describing how much the wood moves across the grain per unit of humidity change. The calculator does not look up species values, so use a figure from a source you trust for your wood.
What does the seasonal humidity swing mean here?+
It is the change in humidity between the driest and the most humid season, entered as a number. The default is 8, and a larger swing gives a proportionally larger gap.
What does the gap per metre result tell me?+
It is the required gap divided by the run width, scaled to one metre (1,000 mm). It lets you compare runs of different widths on the same basis.
Is the calculated gap safe to use as-is?+
It is a simple linear estimate from the numbers you enter, not a guarantee for a given wood or installation. Check the result against your material supplier's or manufacturer's guidance before cutting.