Vapor Pressure Deficit
Calculator

Inputs

Vapor pressure deficit (kPa)
1.267111

Results

Vapor pressure deficit (kPa)
1.267111
Saturation vapor pressure (kPa)
3.167777
Actual vapor pressure (kPa)
1.900666

Weather results

Vapor pressure deficit (kPa)1.267111
Saturation vapor pressure (kPa)3.167777
Actual vapor pressure (kPa)1.900666

formula-map diagram

Vapor pressure deficit (kPa)
1.267111
Saturation vapor pressure (kPa)
3.167777
Actual vapor pressure (kPa)
1.900666

Weather relationship

Formula

VPD = es − ea, es = 0.6108×exp(17.27×T ÷ (T+237.3)) kPa (FAO-56 Tetens form), ea = es×RH÷100

= 1.2671110870027

Note

This is a simplified model: it applies the published standard formula to the numbers you entered and ignores local terrain, radiation, precipitation type and instrument error. Wind chill is the 2001 NWS/Environment Canada regression, valid at or below 10 °C with wind at or above 4.8 km/h; the heat index is the Rothfusz regression, reliable above about 27 °C; dew point uses the Magnus approximation (a = 17.27, b = 237.7 °C) over liquid water; wet bulb uses Stull's approximation at standard sea-level pressure; pressure and density altitude assume the International Standard Atmosphere and dry air. Do not use these results for aviation, structural or safety decisions without an official forecast or a qualified professional.

Example: with the default inputs, calculator.weather.vapor_pressure_deficit_kpa is 1.2671110870027391.

More in Weather and climate

See all →

Frequently asked questions

What does the vapor pressure deficit calculator return?+

It returns the vapor pressure deficit (VPD) in kPa, along with the saturation vapor pressure and the actual vapor pressure, both in kPa. VPD is the gap between what the air could hold and what it holds.

What formula is used?+

VPD = es − ea, with es = 0.6108 × exp(17.27 × T ÷ (T + 237.3)) in kPa (the FAO-56 Tetens form) and ea = es × RH ÷ 100. T is the air temperature in °C.

Which inputs does it need?+

The air temperature in °C and the relative humidity in %. Both are required, and relative humidity must be greater than zero.

How does humidity change the result?+

Saturation pressure es depends only on temperature, while ea scales with relative humidity. Higher humidity raises ea and so lowers the VPD; at 100 % the VPD is zero.

Does it tell me the ideal VPD for my plants?+

No. It only computes the VPD from temperature and humidity; it gives no target range for any crop. Any plant or growing decision based on it is your own judgment, and the figure is an estimate.