Torque Lever Arm
Calculator
Results
- Torque (N·m)
- 15
Physics results
| Torque (N·m) | 15 |
formula-map diagram
- Torque (N·m)
- 15
Physical relationship
Formula
τ = F × r × sin(θ)= 15
Note
This result applies an idealized textbook equation to the numbers you entered; it ignores air resistance, material tolerances and other real-world losses.
Example: with the default inputs, calculator.physics.torque_nm is 15.
More in Physics and engineering
See all →Frequently asked questions
How do you calculate torque from force and lever arm?+
This calculator uses τ = F × r × sin(θ), with the force in newtons, the lever arm length in metres and the angle in degrees. The result is the torque in newton-metres (N·m).
What angle should I enter between the force and the lever arm?+
Enter the angle between the direction of the force and the lever arm itself, measured from the pivot. The default is 90 degrees, where the force is perpendicular to the lever arm and gives the maximum torque.
Why is the torque zero when the angle is 0 or 180 degrees?+
Because sin(0°) and sin(180°) both equal zero. A force pointing straight along the lever arm, toward or away from the pivot, has no turning effect.
Does a longer lever arm really give more torque?+
Yes, in this formula torque is directly proportional to the lever arm length. Doubling r doubles the torque for the same force and angle.
What units does the torque calculator use?+
Force is in newtons (N), lever arm length in metres (m) and angle in degrees. The torque comes out in N·m, so convert other units, such as pounds or feet, before entering them.