Thread Pitch Tpi Conversion
Calculator
Results
- Thread pitch (mm)
- 1.27
- Thread pitch (inches)
- 0.05
- Threads per 25 mm
- 19.685039
Results
| Thread pitch (mm) | 1.27 |
| Thread pitch (inches) | 0.05 |
| Threads per 25 mm | 19.685039 |
formula-map diagram
- Thread pitch (mm)
- 1.27
- Thread pitch (inches)
- 0.05
- Threads per 25 mm
- 19.685039
Formula map
Formula
Pitch(mm) = 25.4 ÷ TPI= 1.27
Note
This result is a simplified model; verify against your shop's own tolerances and material data before cutting.
Example: with the default inputs, calculator.woodwork.pitch_mm is 1.27.
More in Woodworking and metalwork
See all →Frequently asked questions
How do I convert threads per inch (TPI) to pitch in millimetres?+
Divide 25.4 by the TPI. For example, 20 TPI gives a pitch of 25.4 ÷ 20 = 1.27 mm.
What is the difference between TPI and pitch?+
TPI counts how many threads fit in one inch, while pitch is the distance between two neighbouring threads. They are reciprocals, so a higher TPI means a smaller pitch.
What results does the calculator give?+
It returns the pitch in millimetres, the pitch in inches (1 ÷ TPI) and the number of threads in 25 mm.
Does it identify the thread standard or fit?+
No. It only does the arithmetic conversion from TPI to pitch. It does not tell you the thread series, diameter or tolerance.
Why are threads per 25 mm slightly different from TPI?+
Because an inch is 25.4 mm, not 25. The calculator counts threads over exactly 25 mm, so that figure is a little below the TPI value.