Soap Batch Water Ratio
Calculator
Results
- Water needed (g)
- 322
- Total lye solution weight (g)
- 462
- Resulting concentration (%)
- 30.30303
- Target concentration (%)
- 30
Craft results
| Water needed (g) | 322 |
| Total lye solution weight (g) | 462 |
| Resulting concentration (%) | 30.30303 |
| Target concentration (%) | 30 |
formula-map diagram
- Water needed (g)
- 322
- Total lye solution weight (g)
- 462
- Resulting concentration (%)
- 30.30303
- Target concentration (%)
- 30
Formula breakdown
Formula
water = lye × ratio ; concentration = lye ÷ (lye + water) × 100 — illustrative, verify with a lye calculator= 322
Note
Simplified model: these are standard craft estimates based on rectangular layouts, quoted gauge and nominal densities. Real fabric nap, directional prints, shrinkage, pattern matching, yarn lots and supplier SAP values vary, so always make a swatch or test piece and buy a little extra.
Example: with the default inputs, calculator.crafts.water_needed_g is 322.
More in Crafts and sewing
See all →Frequently asked questions
What does the soap water-to-lye calculator compute?+
It multiplies the lye weight by your water-to-lye ratio to get the water needed, then adds both for the total lye solution weight and the resulting concentration.
How is the lye concentration calculated?+
Concentration (%) = lye ÷ (lye + water) × 100. With the default 2.3 parts water per part lye, that gives about 30%.
Does the target concentration change the water amount?+
No. The water amount depends only on the lye weight and the ratio. The target concentration is shown alongside the computed one so you can compare them.
Does it calculate how much lye my recipe needs?+
No. It does not compute saponification values or lye for a recipe. Use a dedicated soap lye calculator for that, and enter the lye weight here.
Is it safe to rely on this for soap making?+
Treat it as an illustrative estimate, not safety advice. Lye is caustic, so verify quantities with a lye calculator and follow proper safety precautions.