Sheet Metal Plate Weight
Calculator

Inputs

Volume (m³)
0.0015

Results

Volume (m³)
0.0015
Mass (kg)
11.775
Mass (lb)
25.959431
Area (m²)
0.5

Results

Volume (m³)0.0015
Mass (kg)11.775
Mass (lb)25.959431
Area (m²)0.5

formula-map diagram

Volume (m³)
0.0015
Mass (kg)
11.775
Mass (lb)
25.959431
Area (m²)
0.5

Formula map

Formula

m = L × W × T × ρ

= 0.0015

Note

This result is a simplified model; verify against your shop's own tolerances and material data before cutting.

Example: with the default inputs, calculator.woodwork.volume_m3 is 0.0015.

More in Woodworking and metalwork

See all →

Frequently asked questions

How is the weight of a metal plate calculated?+

The calculator multiplies length × width × thickness (converted to metres) to get the volume, then multiplies by the metal density: m = L × W × T × ρ. The result is given in kilograms and pounds.

What density should I enter for steel?+

The default is 7,850 kg/m³, which is the value pre-filled for steel. For another metal, replace it with the density of your material in kg/m³, since the calculator takes whatever value you enter.

Which units do the inputs use?+

Length, width and thickness are in millimetres and density is in kg/m³. The calculator converts the dimensions to metres internally, so the volume is in cubic metres.

What else does the calculator return besides weight?+

It also returns the plate volume in m³ and the surface area (length × width) in m². The mass is shown in both kilograms and pounds.

Is the result accurate for real sheets?+

It assumes a flat, solid rectangle of uniform thickness and the density you enter. Cut-outs, holes, coatings and thickness tolerances are not accounted for, so treat it as an estimate and confirm with your supplier.