Sea Level Pressure
Calculator
Results
- Sea-level pressure (hPa)
- 1,008.019552
- Pressure correction to sea level (hPa)
- 58.019552
Weather results
| Sea-level pressure (hPa) | 1,008.019552 |
| Pressure correction to sea level (hPa) | 58.019552 |
formula-map diagram
- Sea-level pressure (hPa)
- 1,008.019552
- Pressure correction to sea level (hPa)
- 58.019552
Weather relationship
Formula
SLP = p × exp(h×g ÷ (Rd×T)), g = 9.80665 m/s², Rd = 287.05 J/(kg·K), T in K= 1008.0195526103
Note
This is a simplified model: it applies the published standard formula to the numbers you entered and ignores local terrain, radiation, precipitation type and instrument error. Wind chill is the 2001 NWS/Environment Canada regression, valid at or below 10 °C with wind at or above 4.8 km/h; the heat index is the Rothfusz regression, reliable above about 27 °C; dew point uses the Magnus approximation (a = 17.27, b = 237.7 °C) over liquid water; wet bulb uses Stull's approximation at standard sea-level pressure; pressure and density altitude assume the International Standard Atmosphere and dry air. Do not use these results for aviation, structural or safety decisions without an official forecast or a qualified professional.
Example: with the default inputs, calculator.weather.sea_level_pressure_hpa is 1008.0195526102826.
More in Weather and climate
See all →Frequently asked questions
What does the sea level pressure calculator do?+
It converts the pressure measured at a station to the equivalent pressure at sea level. It returns the sea-level pressure in hPa and the correction added to the station reading.
What formula does it use?+
SLP = p × exp(h × g ÷ (Rd × T)), with g = 9.80665 m/s², Rd = 287.05 J/(kg·K), h the station elevation in metres and T the air temperature in kelvin.
Which inputs are required?+
Station pressure in hPa, station elevation in metres and air temperature in °C. The temperature is converted to kelvin internally.
Why is sea-level pressure higher than my station reading?+
For a station above sea level, the factor exp(h × g ÷ (Rd × T)) is greater than 1, so the result exceeds the measured pressure. The higher the station, the larger the correction.
Is the result exact?+
It is an estimate. The formula uses the single air temperature you enter and no further atmospheric layering, so it can differ from official reduced pressures. Do not use it for aviation or safety decisions.