Screw Spacing Panel Fastening
Calculator
Results
- Usable length (mm)
- 1,150
- Screw count
- 9
- Actual spacing (mm)
- 143.75
Results
| Usable length (mm) | 1,150 |
| Screw count | 9 |
| Actual spacing (mm) | 143.75 |
formula-map diagram
- Usable length (mm)
- 1,150
- Screw count
- 9
- Actual spacing (mm)
- 143.75
Formula map
Formula
n = round(usable length ÷ target spacing) + 1 fasteners, evenly spaced= 1150
Note
This result is a simplified model; verify against your shop's own tolerances and material data before cutting.
Example: with the default inputs, calculator.woodwork.usable_length_mm is 1150.
More in Woodworking and metalwork
See all →Frequently asked questions
How does the calculator work out the number of screws?+
It subtracts the margin at both ends from the edge length to get the usable length, divides by your target spacing and rounds to the nearest whole number of gaps (at least one). The screw count is that number of gaps plus one.
Why is the actual spacing different from my target?+
The number of gaps must be a whole number, so the usable length is divided evenly among the rounded gap count. The actual spacing is usable length ÷ gaps and can be a little above or below your target.
What is the margin at each end?+
It is the distance from each end of the panel edge to the first and last screw, in millimetres. The same margin is applied at both ends and removed from the edge length before the spacing is worked out.
What does the calculator return?+
It returns the usable length, the number of screws and the actual spacing between them, all based on a single edge. For several edges, run it once per edge.
Does this tell me the right spacing for my panel?+
No. It only distributes screws evenly from the target spacing and margin you enter. Check the required spacing and edge distance with the panel or fastener manufacturer.