Relative Humidity From Wet Bulb
Calculator

Inputs

Relative humidity (%)
50.302532

Results

Relative humidity (%)
50.302532
Vapour pressure (hPa)
15.895886

Weather results

Relative humidity (%)50.302532
Vapour pressure (hPa)15.895886

formula-map diagram

Relative humidity (%)
50.302532
Vapour pressure (hPa)
15.895886

Weather relationship

Formula

e = es(Tw) − A×p×(T−Tw), A = 0.000662 /°C (aspirated psychrometer constant); RH = 100×e÷es(T)

= 50.302532088475

Note

This is a simplified model: it applies the published standard formula to the numbers you entered and ignores local terrain, radiation, precipitation type and instrument error. Wind chill is the 2001 NWS/Environment Canada regression, valid at or below 10 °C with wind at or above 4.8 km/h; the heat index is the Rothfusz regression, reliable above about 27 °C; dew point uses the Magnus approximation (a = 17.27, b = 237.7 °C) over liquid water; wet bulb uses Stull's approximation at standard sea-level pressure; pressure and density altitude assume the International Standard Atmosphere and dry air. Do not use these results for aviation, structural or safety decisions without an official forecast or a qualified professional.

Example: with the default inputs, calculator.weather.relative_humidity_percent is 50.30253208847493.

More in Weather and climate

See all →

Frequently asked questions

How do you find relative humidity from wet and dry bulb temperatures?+

This calculator computes the vapour pressure as e = es(Tw) − A×p×(T − Tw), with A = 0.000662 per °C. Relative humidity is then 100×e ÷ es(T).

Which inputs are required?+

You enter the dry bulb (air) temperature in °C, the wet bulb temperature in °C and the atmospheric pressure in hPa. The defaults are 25 °C, 18 °C and 1013.25 hPa.

What kind of thermometer reading does the formula assume?+

The constant A is the one for an aspirated psychrometer, where air is drawn over the wet bulb. A different instrument or poor ventilation would not match this constant.

Why does pressure matter?+

Pressure appears directly in the correction term A×p×(T − Tw). Entering your actual station pressure gives a more accurate result than the sea-level default.

What does the vapour pressure result show?+

It is the actual vapour pressure e in hPa, computed from the wet bulb. The saturation values use es = 6.112×exp(17.62×T ÷ (243.12 + T)).