Reference Evapotranspiration Hargreaves
Calculator

Inputs

Reference evapotranspiration ETo (mm/day)
5.008582

Results

Reference evapotranspiration ETo (mm/day)
5.008582
Temperature spread (°C)
14

Weather results

Reference evapotranspiration ETo (mm/day)5.008582
Temperature spread (°C)14

formula-map diagram

Reference evapotranspiration ETo (mm/day)
5.008582
Temperature spread (°C)
14

Weather relationship

Formula

ETo = 0.0023×Ra×(Tmean+17.8)×√(Tmax−Tmin) (Hargreaves-Samani 1985)

= 5.0085825779356

Note

This is a simplified model: it applies the published standard formula to the numbers you entered and ignores local terrain, radiation, precipitation type and instrument error. Wind chill is the 2001 NWS/Environment Canada regression, valid at or below 10 °C with wind at or above 4.8 km/h; the heat index is the Rothfusz regression, reliable above about 27 °C; dew point uses the Magnus approximation (a = 17.27, b = 237.7 °C) over liquid water; wet bulb uses Stull's approximation at standard sea-level pressure; pressure and density altitude assume the International Standard Atmosphere and dry air. Do not use these results for aviation, structural or safety decisions without an official forecast or a qualified professional.

Example: with the default inputs, calculator.weather.reference_et_mm_day is 5.008582577935598.

More in Weather and climate

See all →

Frequently asked questions

What does this calculator estimate?+

It estimates daily reference evapotranspiration (ETo) in mm/day with the Hargreaves-Samani equation: ETo = 0.0023 × Ra × (Tmean + 17.8) × √(Tmax − Tmin).

What inputs do I need?+

Extraterrestrial radiation Ra in MJ/m²/day, plus maximum, minimum and mean daily temperature in °C. The calculator does not compute Ra from latitude, so you supply it.

Why is only temperature used and not humidity or wind?+

The Hargreaves-Samani form needs only radiation and temperature. That makes it usable with limited data, but it ignores humidity, wind and sunshine.

What happens if the minimum is higher than the maximum?+

The temperature spread is floored at zero, so the result becomes 0 mm/day. Check that Tmax is not lower than Tmin.

Can I use it to schedule irrigation?+

Treat it as a rough estimate only. It gives a reference value, with no crop coefficient or local calibration, so it is not professional agronomic advice.