Rafter Length Pitch
Calculator

Inputs

Rafter length (m)
3.913118

Results

Rafter length (m)
3.913118
Roof pitch angle (degrees)
26.565051
Total rafter length with overhang (m)
4.274634

Construction results

Rafter length (m)3.913118
Roof pitch angle (degrees)26.565051
Total rafter length with overhang (m)4.274634

formula-map diagram

Rafter length (m)
3.913118
Roof pitch angle (degrees)
26.565051
Total rafter length with overhang (m)
4.274634

Formula breakdown

Formula

rafter length = √(run² + rise²); θ = atan(rise ÷ run)

= 3.9131189606246

Note

Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.

Example: with the default inputs, calculator.construction.rafter_length_m is 3.913118960624632.

More in Construction and trades

See all →

Frequently asked questions

How do I calculate rafter length from run and rise?+

The rafter is the hypotenuse of a right triangle: length = √(run² + rise²). Enter the horizontal run and the rise over that run, both in metres.

How is the pitch angle calculated?+

The angle is atan(rise ÷ run), shown in degrees. With the defaults of 3.5 m run and 1.75 m rise, the rise is half the run.

What does the eave overhang do?+

The overhang is added to the run, measured along the run direction, and the total rafter length is recomputed as √((run + overhang)² + rise²). The rise stays the same.

What does the calculator return?+

The rafter length without overhang (m), the pitch angle in degrees and the total rafter length including overhang (m).

Does it include cuts, ridge or birdsmouth allowances?+

No. It gives the geometric length only. Ridge thickness, notches and cut allowances are not modelled, so adjust for your framing details and check with a builder or engineer.