Propeller Tip Speed
Calculator
Results
- Tip speed (ft/s)
- 795.870138
- Tip speed (mph)
- 542.638731
Aviation and marine results
| Tip speed (ft/s) | 795.870138 |
| Tip speed (mph) | 542.638731 |
formula-map diagram
- Tip speed (ft/s)
- 795.870138
- Tip speed (mph)
- 542.638731
Aviation and marine relationship
Formula
Tip speed = π × diameter × RPM= 795.87013890941
Note
This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.
Example: with the default inputs, calculator.aviation.tip_speed_ft_per_sec is 795.8701389094142.
More in Aviation and marine
See all →Frequently asked questions
How do I calculate propeller tip speed?+
Tip speed = π × diameter × RPM. Enter the propeller diameter in inches and the rotation speed in RPM, and the calculator converts the result to feet per second and miles per hour.
What units does the propeller tip speed calculator use?+
Diameter is in inches and rotation speed in revolutions per minute. Results are given in feet per second and in miles per hour.
Why does tip speed matter?+
It is the speed of the blade tip as it travels around its circle, which grows in direct proportion to both diameter and RPM. This calculator only reports that figure; it does not judge whether a value is acceptable for your propeller.
What happens if I double the RPM or the diameter?+
Tip speed doubles in either case, because the formula is linear in both. Doubling both together multiplies it by four.
Does tip speed include the aircraft or boat moving forward?+
No. It is the rotational speed of the tip only, π × diameter × RPM, with no forward speed added. Treat it as an estimate, not engineering or certification advice.