Propeller Slip Percent
Calculator
Results
- Propeller slip (%)
- 61.421488
- Theoretical pitch speed (knots)
- 62.210799
Aviation and marine results
| Propeller slip (%) | 61.421488 |
| Theoretical pitch speed (knots) | 62.210799 |
formula-map diagram
- Propeller slip (%)
- 61.421488
- Theoretical pitch speed (knots)
- 62.210799
Aviation and marine relationship
Formula
Slip (%) = (pitch speed − actual speed) ÷ pitch speed × 100= 61.421488980536
Note
This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.
Example: with the default inputs, calculator.aviation.slip_percent is 61.42148898053612.
More in Aviation and marine
See all →Frequently asked questions
How do I calculate propeller slip percent?+
Slip (%) = (pitch speed − actual speed) ÷ pitch speed × 100. Enter the pitch in inches, the RPM and your actual boat speed in knots.
How is the theoretical pitch speed worked out?+
Pitch in inches times RPM gives inches per minute, which is converted to knots using 6,076.11548556556 feet per nautical mile. That value is the reference the slip is measured against.
What does a negative slip result mean?+
It means the actual speed entered is higher than the theoretical pitch speed. The calculator shows it as is, so check the speed, RPM and pitch you entered.
What inputs and outputs does this calculator use?+
Inputs are pitch (inches), RPM and actual boat speed (knots). Outputs are the slip percentage and the theoretical pitch speed in knots.
Is the slip value a diagnosis of my propeller?+
No. It is a simple estimate from the three numbers you enter, and it does not say whether your slip is good or bad. For propeller selection, consult a qualified marine professional.