Pressure Altitude From Field Elevation
Calculator

Inputs

Pressure altitude (ft)
861.499999

Results

Pressure altitude (ft)
861.499999
Altimeter correction (ft)
241.499999

Aviation and marine results

Pressure altitude (ft)861.499999
Altimeter correction (ft)241.499999

formula-map diagram

Pressure altitude (ft)
861.499999
Altimeter correction (ft)
241.499999

Aviation and marine relationship

Formula

PA = field elevation + (1013.25 − QNH) × 30 ft

= 861.5

Note

This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.

Example: with the default inputs, calculator.aviation.pressure_altitude_ft is 861.4999999999986.

More in Aviation and marine

See all →

Frequently asked questions

How do I calculate pressure altitude from field elevation?+

Enter the field elevation in feet and the altimeter setting in hPa. The calculator applies PA = field elevation + (1013.25 − QNH) × 30 ft.

Which altimeter setting unit does it expect?+

Hectopascals (hPa), as in QNH. Values in inches of mercury are not accepted, so convert them first.

What does the correction value mean?+

It is the difference between the pressure altitude and the field elevation, in feet. It is positive when the setting is below 1013.25 hPa and negative when it is above.

Where does the 30 ft per hPa figure come from?+

It is the fixed approximation built into this calculator's formula: each hPa of difference from 1013.25 shifts the result by 30 ft. It is not adjusted for altitude or temperature.

Can I rely on this for takeoff or performance planning?+

It is an estimate from a simplified formula. Verify with your altimeter, official weather data and the aircraft's flight manual.