Lumber Yield Percentage
Calculator
Results
- Yield (%)
- 62
- Waste (%)
- 38
- Waste volume (board feet)
- 38
Results
| Yield (%) | 62 |
| Waste (%) | 38 |
| Waste volume (board feet) | 38 |
formula-map diagram
- Yield (%)
- 62
- Waste (%)
- 38
- Waste volume (board feet)
- 38
Formula map
Formula
Yield% = finished volume ÷ rough volume × 100= 62
Note
This result is a simplified model; verify against your shop's own tolerances and material data before cutting.
Example: with the default inputs, calculator.woodwork.yield_percent is 62.
More in Woodworking and metalwork
See all →Frequently asked questions
How do I calculate lumber yield percentage?+
Divide the finished volume by the rough-sawn volume, both in board feet, and multiply by 100. With the defaults, 62 board feet finished from 100 rough gives a 62 % yield.
What does the waste percentage mean?+
Waste is 100 minus the yield: the share of the rough volume that did not end up in the finished parts. The calculator also shows it as a volume, rough minus finished, in board feet.
Which volumes should I enter?+
Enter the rough-sawn volume you started with and the finished volume of the parts you kept, both in board feet. Use the same unit and the same counting method for both, or the percentage will be meaningless.
Can the yield be above 100 %?+
Not in a real cut, since finished parts cannot exceed the rough stock. If your result is above 100 %, the finished volume you entered is larger than the rough volume, so check your two tallies.
Does this tell me the cost of the wasted wood?+
No. It only computes yield, waste percentage and waste volume from the two volumes you enter. Prices, defects and kerf are not part of the calculation.