Leather Hide Yield
Calculator
Results
- Total fabric area (cm²)
- 21,600
- Usable area (cm²)
- 16,200
- Usable area (sq ft)
- 17.437534
- Pieces possible
- 40
Craft results
| Total fabric area (cm²) | 21,600 |
| Usable area (cm²) | 16,200 |
| Usable area (sq ft) | 17.437534 |
| Pieces possible | 40 |
formula-map diagram
- Total fabric area (cm²)
- 21,600
- Usable area (cm²)
- 16,200
- Usable area (sq ft)
- 17.437534
- Pieces possible
- 40
Formula breakdown
Formula
usable = L × W × yield % ; sq ft = usable cm² ÷ 929.0304= 21600
Note
Simplified model: these are standard craft estimates based on rectangular layouts, quoted gauge and nominal densities. Real fabric nap, directional prints, shrinkage, pattern matching, yarn lots and supplier SAP values vary, so always make a swatch or test piece and buy a little extra.
Example: with the default inputs, calculator.crafts.total_area_cm2 is 21600.
More in Crafts and sewing
See all →Frequently asked questions
How many pieces can I cut from a leather hide?+
The calculator multiplies hide length by width to get the total area, applies the usable yield percentage, then divides by the area each piece needs. It rounds down to whole pieces.
What is the usable yield percentage?+
It is the share of the hide you expect to be usable after imperfections and trim. The default is 75%, and you should set it from your own hide.
Why is the piece count rounded down?+
Only whole pieces count, so any leftover area smaller than one piece is not included in the count.
Does it also give the area in square feet?+
Yes. The usable area is shown in cm² and converted to square feet by dividing by 929.0304.
Does it account for the shape and layout of my pieces?+
No. It works with total areas only, so awkward shapes or nesting losses can reduce the real count. Treat the result as an estimate and lay out the pieces to check.