Joist Spacing Count
Calculator

Inputs

Joist count
13

Results

Joist count
13
Joist linear metres
52

Construction results

Joist count13
Joist linear metres52

formula-map diagram

Joist count
13
Joist linear metres
52

Formula breakdown

Formula

n = floor(width ÷ spacing) + 1

= 13

Note

Simplified model: results are quantity estimates only. They ignore openings, overlaps, cuts, site conditions and local building codes. Structural figures are not a substitute for a design by a qualified engineer.

Example: with the default inputs, calculator.construction.joist_count is 13.

More in Construction and trades

See all →

Frequently asked questions

How many joists do I need for a floor?+

Divide the floor width, measured across the joists, by the on-centre spacing, round down, and add one: n = floor(width ÷ spacing) + 1. The extra one accounts for the joist at the far end.

What does on-centre spacing mean here?+

It is the distance in millimetres from the centre of one joist to the centre of the next. The default is 400 mm.

What is the linear metres figure?+

It is the joist count multiplied by the joist span you enter, which gives the total length of joist material before any cutting waste.

Which inputs do I need to provide?+

Floor width across the joists (m), joist spacing on centre (mm) and joist span, the length of each joist (m). The defaults are 5 m, 400 mm and 4 m.

Does it check that the joists are strong enough?+

No. It only counts joists from the geometry you enter. Joist size, species, load and span limits are not checked, so confirm them against local building rules or with an engineer.