Frost Point
Calculator

Inputs

Frost point (°C)
-0.956463

Results

Frost point (°C)
-0.956463
Frost point (°F)
30.278365
Vapour pressure (hPa)
5.647393

Weather results

Frost point (°C)-0.956463
Frost point (°F)30.278365
Vapour pressure (hPa)5.647393

formula-map diagram

Frost point (°C)
-0.956463
Frost point (°F)
30.278365
Vapour pressure (hPa)
5.647393

Weather relationship

Formula

Tf = b×γ ÷ (a−γ), γ = ln(e÷6.1121), a=22.46, b=272.62 °C (WMO ice-phase Magnus form)

= -0.95646347875543

Note

This is a simplified model: it applies the published standard formula to the numbers you entered and ignores local terrain, radiation, precipitation type and instrument error. Wind chill is the 2001 NWS/Environment Canada regression, valid at or below 10 °C with wind at or above 4.8 km/h; the heat index is the Rothfusz regression, reliable above about 27 °C; dew point uses the Magnus approximation (a = 17.27, b = 237.7 °C) over liquid water; wet bulb uses Stull's approximation at standard sea-level pressure; pressure and density altitude assume the International Standard Atmosphere and dry air. Do not use these results for aviation, structural or safety decisions without an official forecast or a qualified professional.

Example: with the default inputs, calculator.weather.frost_point_c is -0.9564634787554269.

More in Weather and climate

See all →

Frequently asked questions

What does the frost point calculator compute?+

It computes the frost point, the temperature at which air would become saturated with respect to ice, from air temperature and relative humidity. It returns it in °C and °F, plus the vapour pressure in hPa.

What formula does it use?+

It first finds the vapour pressure e = 6.1121 × exp(17.502 × T ÷ (240.97 + T)) × RH ÷ 100. Then Tf = b × γ ÷ (a − γ), with γ = ln(e ÷ 6.1121), a = 22.46 and b = 272.62.

Which inputs are needed?+

The air temperature in °C and the relative humidity in %. Relative humidity must be greater than zero.

How is the frost point different from the dew point?+

The frost point is the saturation temperature with respect to ice, while the dew point refers to liquid water. This calculator uses the ice-phase form given above and returns only the frost point.

Can I rely on it to predict frost on my plants?+

Treat it as an estimate only. It computes a number from two inputs and does not model local conditions such as ground cooling or wind, so it is not a frost forecast or professional advice.