Dye Bath Water Ratio
Calculator
Results
- Water needed (ml)
- 4,000
- Water needed (l)
- 4
- Dye needed (g)
- 4
Craft results
| Water needed (ml) | 4,000 |
| Water needed (l) | 4 |
| Dye needed (g) | 4 |
formula-map diagram
- Water needed (ml)
- 4,000
- Water needed (l)
- 4
- Dye needed (g)
- 4
Formula breakdown
Formula
water = fabric weight × liquor ratio ; dye = fabric weight × concentration %= 4000
Note
Simplified model: these are standard craft estimates based on rectangular layouts, quoted gauge and nominal densities. Real fabric nap, directional prints, shrinkage, pattern matching, yarn lots and supplier SAP values vary, so always make a swatch or test piece and buy a little extra.
Example: with the default inputs, calculator.crafts.water_needed_ml is 4000.
More in Crafts and sewing
See all →Frequently asked questions
How much water do I need for a dye bath?+
Enter the dry fabric weight and the liquor ratio. Water in ml is fabric weight in g times the ratio, also shown in litres.
What is the liquor ratio?+
It is the amount of water per unit of dry fabric weight. The default is 20, so 200 g of fabric gives 4,000 ml of water.
How much dye does the calculator give?+
Dye in grams equals fabric weight times the dye concentration percentage. With the 2% default, 200 g of fabric gives 4 g of dye.
Should I weigh the fabric wet or dry?+
The calculator expects dry fabric weight. A wet weight would overstate both the water and the dye.
Is the result a guarantee of colour?+
No. It only applies the two formulas above; final shade depends on the dye, fabric and process, so test on a scrap first.