Dme Slant Range Ground Distance
Calculator
Results
- Ground distance (NM)
- 14.926688
- Altitude component (NM)
- 1.481209
Aviation and marine results
| Ground distance (NM) | 14.926688 |
| Altitude component (NM) | 1.481209 |
formula-map diagram
- Ground distance (NM)
- 14.926688
- Altitude component (NM)
- 1.481209
Aviation and marine relationship
Formula
Ground distance = √(slant range² − (altitude ÷ 6076.11548556556)²)= 14.926688125888
Note
This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.
Example: with the default inputs, calculator.aviation.ground_distance_nm is 14.926688125887578.
More in Aviation and marine
See all →Frequently asked questions
How do I convert DME slant range to ground distance?+
Ground distance = √(slant range² − (altitude ÷ 6076.11548556556)²). Enter the DME distance in nautical miles and the aircraft altitude above the station in feet.
Why is DME distance different from ground distance?+
DME measures the straight line from the aircraft to the station, which includes the height. The calculator removes the altitude component to get the horizontal distance.
What altitude should I enter?+
The aircraft altitude above the station, in feet. The field accepts zero or more, and the calculator converts it to nautical miles using 6,076.11548556556 feet per nautical mile.
What happens if the altitude is greater than the slant range?+
The calculator sets the value under the square root to zero, so the ground distance shows as 0 rather than failing. Check your inputs in that case.
What results does it show, and are they exact for flight use?+
It shows the ground distance and the altitude component, both in nautical miles. It is a geometric estimate only and not for navigation or flight planning decisions.