Buffer Dilution From Stock
Calculator

Inputs

Stock volume needed (mL)
10

Results

Stock volume needed (mL)
10
Diluent volume needed (mL)
490
Dilution factor
50

Biology and lab results

Stock volume needed (mL)10
Diluent volume needed (mL)490
Dilution factor50

formula-map diagram

Stock volume needed (mL)
10
Diluent volume needed (mL)
490
Dilution factor
50

Formula breakdown

Formula

C₁V₁ = C₂V₂ → V₁ = (C₂ × V₂) ÷ C₁

= 10

Note

Simplified model: these results use standard textbook laboratory relationships and average constants (A260 = 1 for 50 µg/mL dsDNA, 617.96 g/mol per base pair, ~110 Da per amino acid, ideal exponential growth). Real samples vary with purity, contaminants, buffer, temperature and instrument calibration. Always confirm against your own standards and protocol; do not use for diagnostic or safety-critical work.

Example: with the default inputs, calculator.biology.stock_volume_needed_ml is 10.

More in Biology and lab

See all →

Frequently asked questions

How much stock solution do I need?+

The stock volume is V₁ = (target molarity × final volume) ÷ stock molarity, from C₁V₁ = C₂V₂. The result is in mL.

How much diluent should I add?+

The diluent volume is the final volume minus the stock volume, in mL. It assumes the volumes simply add up to the final volume.

What is the dilution factor?+

It is stock molarity ÷ target molarity. A factor of 50 means the stock is diluted 50-fold.

What units do I enter?+

Enter both molarities in mol/L and the final volume in mL. Both molarities must use the same unit.

What if the target is higher than the stock?+

You cannot concentrate by diluting. The stock volume would then exceed the final volume and the diluent volume comes out negative, so check your values.