Audio Video Sync Drift
Calculator

Inputs

Audio/video sync drift (s)
3.596403

Results

Audio/video sync drift (s)
3.596403

Media and photography results

Audio/video sync drift (s)3.596403

formula-map diagram

Audio/video sync drift (s)
3.596403

Media and photography relationship

Formula

drift = duration × (1 − nominal ÷ actual)

= 3.5964035964035

Note

This result uses the values you entered and a simplified planning equation; verify quantities and local requirements before purchasing or building.

Example: with the default inputs, calculator.media_photo.drift_seconds is 3.5964035964034746.

More in Media and photography

See all →

Frequently asked questions

How is audio-video sync drift calculated?+

Drift equals the recording duration × (1 − nominal sample rate ÷ actual sample rate). You enter the duration in seconds and the two rates in Hz, and the result is in seconds.

What do the default values show?+

One hour (3600 s) recorded with a nominal 48,000 Hz clock that actually runs at 48,048 Hz gives about 3.6 seconds of drift. It shows how a tiny clock error adds up over a long take.

What does the sign of the result mean?+

A positive result means the actual rate is higher than the nominal one, and a negative result means it is lower. The calculator only gives the signed amount of drift, not which track leads in your editor.

What is the difference between nominal and actual sample rate?+

The nominal rate is the one the device is set to, for example 48,000 Hz. The actual rate is what its clock really delivers, which you must measure or know yourself, since the calculator does not estimate it.

Does this tell me how to fix the sync in my editor?+

No, it only computes the accumulated offset in seconds from the three values you enter. Treat it as an estimate and compare it with what you actually see on your timeline.