Anchor Swing Circle Radius
Calculator

Inputs

Swing radius (ft)
180

Results

Swing radius (ft)
180
Swing circle area (ft²)
101,787.601976

Aviation and marine results

Swing radius (ft)180
Swing circle area (ft²)101,787.601976

formula-map diagram

Swing radius (ft)
180
Swing circle area (ft²)
101,787.601976

Aviation and marine relationship

Formula

Swing radius = rode length paid out + boat length overall

= 180

Note

This is a simplified model: it applies a standard navigation, performance or seamanship formula to the numbers you entered. True airspeed and density altitude use the ISA troposphere model for dry air and ignore humidity, compressibility and instrument or position error, so they are not a substitute for your aircraft's flight manual or an air data computer. Wind, climb, descent and fuel figures assume a steady wind and a constant speed and fuel flow for the whole leg; they ignore manoeuvring, holding, taxi and start-up fuel, terrain, turbulence and air traffic control routing. Takeoff distance scales an entered sea level figure by a rule-of-thumb percentage per 1000 ft of density altitude and is not a certified performance chart. Weight and balance results depend entirely on the arms and weights you enter and must be checked against the approved loading envelope. Hull speed is the classic 1.34 × √LWL displacement estimate, boat fuel burn is a horsepower-based approximation, anchor scope is a rule of thumb, and the rule of twelfths is a linear approximation of a sinusoidal tide that does not hold in all locations. Always use official charts, tide tables, the aircraft or vessel manuals and current weather, and treat these numbers as planning estimates only.

Example: with the default inputs, calculator.aviation.swing_radius_ft is 180.

More in Aviation and marine

See all →

Frequently asked questions

How is the anchor swing radius calculated?+

Swing radius = rode length paid out + boat length overall, both in feet. The calculator also gives the area of the circle, π × radius².

What inputs does it need?+

Rode length paid out in feet (greater than zero) and boat length overall in feet (zero or more). Defaults are 150 ft and 30 ft.

What do I enter as rode length?+

The length of rode you actually have paid out. The calculation adds it directly to the boat length, with no depth or scope adjustment of its own.

What is the swing circle area for?+

It is the area of a circle with the swing radius, in square feet. It helps you see how much space the boat could sweep, for example to compare with neighbouring boats.

Is the result a guaranteed safe anchoring distance?+

No. It is a simple worst-case style estimate from two numbers and ignores wind shifts, current, tide changes and other boats. Use your seamanship and local conditions to decide how much room you need.